Phoenix 270HTx dehumidifier

Phoenix 270HTx

$2,669.00

The Phoenix 270HTx is one of the most effective and versatile drying devices available.

Category: Tag:

Product Description

The Phoenix 270HTx is one of the most effective and versatile drying devices available. The Phoenix 270HTx features more water removal (161 pints per day@AHAM) and higher grain depression than other refrigerant dehumidifiers, while drawing only 8.9 amps of electricity.

The 270HTx features Phoenix’s patented bypass design, which is now enhanced to compensate for temperature automatically. By sensing and adjusting to temperature changes in the drying chamber, the 270HTx maximizes water removal over an extended operating range without the need for manual adjustments.

At higher temperatures, where typical LGRs lose effectiveness, the Phoenix 270HTx automatically adjusts to continue removing moisture. This offers several advantages to the restorer, including faster evaporation rates, quicker drying, and elimination of he need to remove or modify equipment for temperature control.

The downward-focused exhaust airflow directs dehumidified low-grain air toward the floor, while a raised base improves drying directly under the dehumidifier. The Phoenix 270HTx also features a recessed condensate outlet, onboard wheels, increased airflow with higher static pressure and an improved skid plate design.

As always, Phoenix dehumidifiers feature significant air filtration. The standard 65% ERV-1 filter removes over 90% of seven-micron particles (the size of a human red blood cell). This filtration improves the air quality in the areas being dried and assures the continued optimal performance of the refrigeration system.

The multiple ducting options on the Phoenix 270HTx allow or ducting both the intake air and the filtered, dehumidified exhaust air.

  • Automatic Bypass Technology Patented technology automatically adjusts for temperature variation, increasing performance over a wider operating range.
  • High Capacity Removes 161 pints per day at AHAM.•
  • 8.9 amps Removes over 6.5 pints/kWh. R-410A Refrigerant
  • More Grain Depression Drier air from an LGR finishes jobs quicker versus a conventional refrigerant dehumidifier.
  • Focused Airflow Patented focused outlet directs air downward across the wet surface.
  • Motorized Impeller 380 CFM; Faster drying and superior static pressure for ducting.
  • Multiple Ducting Options 12” intake, 10” exhaust.
  • Solid State Controls Easy to read and operate.
  • Recessed 12” Wheels – Allows greater maneuverability on the job site and efficient storage. Rolls over obstacles with ease.
  • MERV-11 Pleated Media Air Filter
Power 8.9 amps, 110-120 VAC, Grounded
Water 161 pints/day @ AHAM (80°F, 60%)
Removal 34 gal/day maximum @ saturation
Blower 380 CFM Internal Condensate Pump with 20’ lift,30’ vinyl hose
Refrigerant 1 lb, 10 oz. R-410A
Operating Temp 33°F to 125°F
Filters 16” x 20” x 2” Pleated Media MERV-11
Intake Duct 12” Flex-Duct
Outlet Duct 10” Lay-Flat
Unit Shipping
Width 20″ 24″
Height 40″ 47″
Depth 23″ 26″
Weight 130 lbs 148 lbs
  • 12” x 25’ Intake Flex Duct
  • 10” x 250’ Lay-flat Duct
  • 16” x 20” x 2” Pleated Media MERV-8
  • 16” x 20” x 2” Pleated Media MERV-11 (Standard)
Five Years

  • 1st year 100% of Parts and Labor
  • 2nd-5th year 100% of sealed refrigeration system parts.

Additional Information

Weight 148 lbs
Dimensions 26 x 24 x 47 in